Login
|
View Quote (0)
| Languages:
Español
Chinese
TYPICAL APPLICATIONS
|
GLOSSARY
|
MEDIA
|
FAQ
|
RETIRED PRODUCTS
|
ABOUT US
Hazard Monitoring
Single Leg System
Multi-Leg System
Sensors & Accessories
Networked I/O
Shaft Speed Monitoring
Speed Sensors
Sensors - Digital Pulse Output
Sensors - 4-20mA Output
Sensors - Proximity
Sensors - DeviceNet & ASi
Sensors - Magnetic Pickup (Coil) Output
Pulse Generators
Pulser Discs
Magnet Wheels
Split Collar Wraps
Ring Kits For Motors
Rotary Shaft Encoders
Mounting Accessories
EZ Mount Brackets
Disc Guards
Speed Switches
Single Relay Output
Dual Relay Output
ASi Network Output
Meters & Counters With Display
Display With Relay Output
Display With 4-20mA Output
Display
Counters
Signal Conditioners
Frequency to Analog
Analog to Frequency
Reverse Rotation Detectors
Temperature Sensors
Bearing Monitoring
Belt Misalignment
Vibration, Position, & Level Monitors
Vibration Monitors
Position Monitors
Tilt Switches
Data Acquisition & Networked I/O
Motor/Motion Controllers
Closed Loop Motor Controllers
Potentiometers with Digital Displays
Accessories
Encoders & Ring Kits
Rotary Shaft Encoders
Ring Kits For Motors
Installation Manuals
Dimensional Drawings
Product Catalog
Trade Shows
Speed Switch & Sensor Guide
UL Certified Products
Product Search
Use keywords to find the product you are looking for.
Advanced Product Search
Site Search
Search site contents, including PDFs
Media
Career Opportunities
Frequently Asked Questions about:
•
Sensors
•
•
Discs and Wraps
•
•
Retired Products
•
- Other FAQ's -
What types of sensor outputs can be interfaced with my Electro-Sensors equipment?
How do I calculate frequency or Hertz (Hz)?
What is the maximum operating temperature for Electro-Sensors products?
Is my 4-20mA or 0-10V output isolated?
What if I need to return my product for credit/repair?
What types of sensor outputs can be interfaced with my Electro-Sensors equipment?
The standard output being used with Electro-Sensors equipment is NPN Open Collector type. However, much of our equipment can be interfaced with other sensors that are not manufactured by Electro-Sensors. Consult Factory on specific equipment and sensor details, or refer to product data sheets on this web-site.
How do I calculate frequency or Hertz (Hz)?
Frequency is measured in Hertz. Hertz is the measure of pulses per second. Hertz is calculated using the following equation:
Hertz = (PPR)(RPM)/60
Where PPR = Pulses Per Revolution
RPM = Revolutions Per Minute
What is the maximum operating temperature for Electro-Sensors products?
When specified, our sensors, discs, and wraps can be used in areas up to a maximum of 302° F. Our Electronics are rated to 122°F. Consult Factory with exact application concerns.
Is my 4-20mA or 0-10V output isolated?
Most of our current products (SA420, TR400, TR5000, CT6000, MS320, MicroSpeed 196, MS332) have an isolated output. Isolator cards (CVI-50 for example) may be purchased for other equipment.
What if I need to return my product for credit/repair?
Contact Electro-Sensors, Inc. for details and Return Policy @ 1-800-328-6170. All products being returned must have a Return Authorization Number (RA#).
© 2012 Electro-Sensors, Inc.
6111 Blue Circle Drive
Minnetonka, MN 55343
1-800-328-6170
PH 952-930-0100
Fax 952-930-0130
Site Created By:
ecreativeworks
