Featured Products

Linear Slide Gate Position Sensor with Analog Output

March 23, 2015 | Featured Products

Position Sensor Electro-Sensors SG1000A is a 4-20 mA output slide gate sensor that provides independent and accurate feedback of gate or valve position to an external device such as a PLC or optional process meter. The display decodes the signal from the SG1000A and shows the percentage open between zero (fully closed) and 100 (fully open), allowing the gate to be accurately positioned when regulating the flow of a product or blending more than one raw material. The SG1000A mounts directly to the end of the sli... more

Analog Shaft Speed Sensor with Relay for Hazardous Locations

March 17, 2015 | Featured Products

Speed Sensor with Relay The FB420 Shaft Speed Switch / Shaft Speed Sensor with SPDT Relay works with Electro-Sensors magnetic pulser discs and wraps. It provides a 4-20mA signal directly proportional to the rotational speed of a monitored shaft and has a 4 digit LCD display capable of displaying from 0.000 to 9,999 rpm or from 4 to 20 mA, the display is also used for calibration and troubleshooting. The FB420 has one relay that can be programmed for failsafe over speed alarm or failsafe under speed alarm. 24 VDC pow... more

Dust Ignition Proof, Stainless Steel Shaft Speed Sensors with Analog Output

February 12, 2015 | Featured Products

FM approved speed sensors The patented ST420-LT and ST420-DI are 2-wire, loop-powered, 4-20mA analog output shaft speed sensors. They detect passing magnets of a shaft-mounted pulser disc or wrap and output a smooth, continuous 4-20 mA analog signal in direct proportion to shaft rotation speed. The ST420-LT and ST420-DI have integral conduit attachments, are NEMA 4X, IP65 and Dust Ignition-proof for Class II, Div I (E, F, G) hazardous locations. All models have rugged stainless steel M18x1 housings for harsh enviro... more

NEW PM500 Process Meter - Converts Two Analog Sensor Inputs Into Any User Unit

November 10, 2014 | Featured Products

two input process meter with analog and relay options Electro-Sensors is excited to announce the new PM500, an economical process meter that can run as a standalone ratemeter or can be configured to run as a complete control and display system. The PM500 is fully programmable and has two 4-20 mA sensor inputs that can be scaled to any user-selected units. Although there are many different types of sensor inputs, the most common are temperature, speed, and position. The PM500 can be programmed to display two different processes because the inputs ar... more

TR400 Fully Programmable Process Ratemeter Displays Rate or Time-In-Process

September 22, 2014 | Featured Products

Process Ratemeter with Speed Sensor The TR400 is a full logic control process ratemeter that can display any production rate or time-in-process easily and accurately. The ability to accurately detect and convert 0.01 to 4,000 Hz signal input makes the TR400 an inexpensive solution to many industrial applications. With the addition of optional relay outputs and/or 4-20 mA analog output, the TR400 becomes a complete process control and display system. The optional relay outputs can be programmed for under-speed or over-speed, and in... more

Accurately Measure Slide Gate Position with the Popular SG1000A Position Sensor

August 5, 2014 | Featured Products

Accurately Measure Slide Gate Position with the SG1000A The SG1000A slide gate position sensor is a complete monitoring system housed in a compact and rugged explosion proof enclosure. It provides independent, accurate feedback of slide gate position to a controller (PLC) or Electro-Sensors optional remote display. The SG1000A mounts directly to the end of the slide gate drive shaft and is easily calibrated with a single push button for setting the fully open and fully closed limit points of the gate. A second directional switch (clockwis... more

We Have Released our First YouTube Video for Calibrating the M100T Speed Switch

July 14, 2014 | Featured Products

Electro-Sensors Technical Tips You Tube Page Electro-Sensors is proud to introduce its new YouTube Channel, which will include instructional videos on various products. We have tracked your technical questions throughout the years and have come up with a list of products we will be featuring on our channel. These 3-5 minute clips will show users specific installation and calibration techniques so that integration will be simple and seamless. Our first Electro-Sensors "Tech Tips" video shows users the proper way to calibrate and install our... more

HazardPRO Wireless Hazard Monitor is in a Class of its Own - The Best Software Available!

June 18, 2014 | Featured Products

Wireless Hazard Monitor Electro-Sensors now manufactures a new wireless hazard monitoring system called HazardPRO that will change the way the industry monitors critical applications. HazardPRO was engineered from the ground up to communicate wirelessly, eliminating the need for costly conduit, wires, and labor for installation. HazardPRO Wireless Hazard Monitoring Features Field-proven reliability Intuitive touchscreen display Lowest total installed cost Real-time display of system data Battery... more

Bearing Temperature Sensors Optimized for Class II Hazardous Areas

June 15, 2014 | Featured Products

Bearing Temperature Sensor with Adjustable Probe Bearing temperature measurement with the patented TT420Z-LT (Liquid-Tight) family of temperature sensors offers superior performance, ease of installation, and industry standard 4-20 mA outputs. All temperature sensors are factory calibrated and are available with various probe lengths, conduit adapters, and grease fittings. The integrated grease fitting allows the user to grease bearings without disturbing the temperature sensor installation. Features 2-wire, loop-powered 4-20 mA anal... more

HazardPRO Wireless Hazard Monitoring System for Industrial Applications

May 14, 2014 | Featured Products

Wireless Hazard Monitoring Our new HazardPRO wireless hazard monitoing systems were built to communicate wirelessly, eliminating the need for costly conduit and wiring. This revolutionary design significantly reduces the total installation cost. This savings allows operators and plant managers to invest in the best hazard monitoring software and the most rugged sensors that provide increased system reliability, ease of use, and fewer false alarms            ... more