Model BA100-1 Conveyor Belt Alignment Switch protects conveyor belts from damage due to belt misalignment or runoff. These controls are used in pairs with one switch placed on each side of the conveyor belt. Each unit can be equipped with two limit switches to produce signals indicating belt misalignment at two deviation points. The first signal point could indicate small belt deviation by sounding an alarm. The second signal point could guard against extreme belt runoff by shutting down the conveyor. Each control consists of an aluminum housing with a red epoxy coated roller. The roller is adjustable up to 90° in both directions and is positioned approximately 1" from the conveyor belt. The switch actuation points are adjustable from 0° to 45° by a simple change of the actuating cam(s). The model BA100 can be furnished with general purpose or explosionproof construction. Cast iron and epoxy-coated housings are also available.

• BA100-1 has (1) limit switch rated for 20A @ 120 VAC, 240 VAC, or 480 VAC.
• Highly visible red epoxy coated roller of 1-1/4" diameter with nylon bushings for long life.
• Simple Installation - drill (3) 13/32" diameter holes and mount on conveyor.
• 3/4" NPT conduit opening on all weatherproof and explosionproof units.
• Roller arm can move up to 90 degrees in either direction and is spring loaded for automatic reset
• Optional manual reset available.
• Cast aluminum housing standard, optional cast iron housing available.
• Operating temperature range: -40F to 150F.
• Available in NEMA 4/5 weatherproof,dust-tight housing, and explosionproof NEMA 7/9 housing.

Product Options:
Environment:	WaterproofDustproof (Nema 12)
Options:	Select From Choices BelowManual ResetEpoxy CoatingCast Iron Housing