Electro-Sensors 916A passive analog sensors are designed for use with pulse generators that provide magnetic targets, such as Electro-Sensors Pulser Discs and Split Collar Pulser Wraps. 916A sensors have a 3/4" threaded aluminum body, are supplied with a mounting bracket and jam nuts, and are recommended for use with Pulser Discs and Split Collar Pulser Wraps. The output signal from the 916A analog sensor is clipped at 20vac. These sensors switch high and low in the presence of alternating magnetic fields, and generate a sine wave signal when used with Electro-Sensors pulse generators, which have evenly spaced magnets of alternating polarity. 916A analog sensors allow for a large gap distance of 3/8" ± 1/8" between the sensing surface and the pulse generator’s target magnets. 916A sensors come with 10 feet of 2-wire shielded cable as standard, and can be mounted up to 1,500 feet from the control unit (i.e. speed switch or tachometer). Electro-Sensors products bring efficiency and safety to your operations by preventing machine damage, product waste, and costly downtime.
