Electro-Sensors offers motor control solutions for a broad range of applications. In the event that your exact specifications cannot be met by our standard products, our technical engineers can often create a customized solution fabricated to your application need.
Below are examples of just some of the configurable units we have developed for demanding applications:
- MS#37 Draw Controller. Provides a constant RPM difference between the leader and follower motor regardless of the leader speed.
- MS#16 Inverse Setpoint. Used to decrease feedback or speed as the setpoint is increased. Typical applications include time-in-process ovens, and wraps per inch winders.
- MS#34 16 Bit Master. A controller for master mode only that provides DAC resolution to .001%. The setpoint and display resolution is 5 digits.
- MS#26 Variable PID Update Time. Used in master or follower mode to control a device with a slow response time, such as very large motors and hydraulic systems with hydraulic servo valves. Also very effective with single quadrant drives.
- MS#100 Multiple Setpoint. Allows the user up to 16 setpoints and 16 setpoint time durations, this unit is typically used on test stands with a repetitive motor speed cycle. Also features a programmable cycle counter.
- MS#76 Dancer Position. Works in follower mode to position a dancer to a setpoint value, typically a center position in center core winding applications. A lead pulse signal is required from the line speed and an analog signal from the dancer.
Electro-Sensors provides only the motor controllers and feedback devices (ring kits or rotary shaft encoders) and is not responsible for the selection of motors and drive equipment. Electro-Sensors does not provide systems design, integration, or installation services. Contact your local systems integrator or electrical contractor for these services. Proper installation of our equipment is the sole responsibility of the purchaser and is in no way guaranteed by Electro-Sensors, Inc.