Conveyor Belt Safety Switch (Pull Cord)
• Easy mounting using the three holes on the bottom
half of the housing. The holes are designed for
• 200 Ft. of protection per unit.
• Adjustable Actuation Force.
• Optional Indicator lamp available
• Operating temperature range: 0 to 40 °C [32 to 104 °F]
• Cable Break Detection
The SSCB100 has (1) dry contact relay and the SSCB200 has (2) dry contact relays. These conveyor belt safety switches protect conveyor belts and personnel from dangerous events that can occur along conveyor belts. They provide personnel an easy way to shutdown conveyors or other equipment that may cause danger. Multiple units can be used on each conveyor to provide protection along the entire conveyor. The force required to trip a shut-down is adjustable from 20, 28, and 40 Lbs of force. The SSCB is furnished with a heavy-duty cast aluminum housing. There are explosion proof and corrosion resistant options available for the SSCB.
SSCB100 - 1 SP/DT Switch, No Light
SSCB100X - Explosion Proof, 1 SP/DT Switch, No Light
SSCB200 - 2 SP/DT Switches, No Light
SSCB200L - 2 SP/DT Switches with Light
SSCB200X - Explosion proof, Two SP/DT & cable break detection
SSCB200D - Special NEMA 4,4X & NEMA 9 Enclosure, 2 SP/DT Switches, No Light
SSCB500 - 2 DP/DT Switches, No Light
SSCB500L - 2 DP/DT Switches with Light
SSCB500X - Explosion Proof, 2 DP/DT Switches, No Light
SSCB500D - Special NEMA 4,4X & NEMA 9 Enclosure, 2 DP/DT Switches, No Light
Customer Comments (limit 500 characters)